虚拟仪器软件LabVIEW在仪器控制中的应用

在虚拟仪器及其开发环境ＬａｂＶＩＥＷ的基础上，提出并实现了用ＬａｂＶＩＥＷ对ＧＰＩＢ仪器进行控制的两种方法。该方法对串行、ＶＸＩ等其它类仪器的控制同样具有参考价值。     

一种改进的防空导弹侧向回路稳定控制结构分析

基于复合稳定控制结构,对某防空导弹侧向回路过载反馈通道的结构进行了改进。基于理论分析,结合工程应用实际进行了数学仿真验证。结果表明:在保持足够稳定裕度的前提下,改进结构的系统快速性好,鲁棒性更优。     

Singularity analysis for single gimbal control moment gyroscope system using space expansion method

Control Moment Gyroscope (CMG) is an effective candidate for agile satellites and large spacecraft attitude control because of its powerful torque amplification capability. The most serious situation, however, in using CMG is the inherent geometric singularity problem, where there’s no torque output along a particular direction. Space expansion method has been proposed in this work for the singularity analysis. Based on inverse mapping transformation, an expanded Jacobian matrix which is a full rank square matrix is obtained. The singular angle sets of the 3-parallel cluster and pyramid cluster are distinguished using space expansion method. An effective hybrid steering strategy, able to deal with the elliptic singularity, is further proposed. Simulation results demonstrate the excellent performance of the proposed steering logic compared to the generalized singular robust logic and pseudo inverse logic in terms of energy consumption and torque error.     

UDu~T分解滤波算法及其应用

本文介绍UDU~T 分解滤波算法;用工程师容易理解的方法重新推导时间修正和量测修正滤波公式,并给出标准通用的UDU~T 分解滤波子程序。本算法子程序已实际用于工程估计器中。本算法具有高的数字稳定性。作为UDU~T 分解滤波算法理论和工程应用之间桥梁的本通用标准子程序具有良好性能,使用方便,极易推广应用。     

计算机辅助的低空风切变改出优化控制

介绍了动态系统的计算机辅助直接优化方法的原理及其在低空风切变改出飞行中的应用，利用较真实的风切变工程化模型，选择适当的控制函数模型，性能准则及其约束条件，通过计算机直接地，系统地和迭代地探寻最优条件，对飞机改出低空风切变控制进行了优化，获得了最佳改出性能飞行参数曲线，并与没有优化的改出引导策略结果作了比较，结果表明，通过优化，飞机改出低空风切变的性能获得了明显的改善。     

Crew autonomy for deep space exploration: Lessons from the Antarctic Search for Meteorites

Future piloted missions to explore asteroids, Mars, and other targets beyond the Moon will experience strict limitations on communication between vehicles in space and control centers on Earth. These limitations will require crews to operate with greater autonomy than any past space mission has demonstrated. The Antarctic Search for Meteorites (ANSMET) project, which regularly sends small teams of researchers to remote parts of the southern continent, resembles a space mission in many ways but does not rely upon a control center. It provides a useful crew autonomy model for planners of future deep space exploration missions. In contrast to current space missions, ANSMET gives the crew the authority to adjust competing work priorities, task assignments, and daily schedules; allows the crew to be the primary monitor of mission progress; demands greater crew accountability for operational errors; requires the crew to make the most of limited communication bandwidth; adopts systems designed for simple operation and failure recovery; and grants the crew a leading role in the selection and stowage of their equipment.     

PI controller relay auto-tuning using delay and phase margin in PMSM drives

This paper presents an auto-tuning method for a proportion plus integral（PI） controller for permanent magnet synchronous motor（PMSM） drives, which is supposed to be embedded in electro-mechanical actuator（EMA） control module in aircraft. The method, based on a relay feedback with variable delay time, explores different critical points of the system frequency response.The Nyquist points of the plant can then be derived from the delay time and filter time constant.The coefficients of the PI controller can then be obtained by calculation while shifting the Nyquist point to a specific position to obtain the required phase margin. The major advantage of the autotuning method is that it can provide a series of tuning results for different system bandwidths and damping ratios, corresponding to the specification for delay time and phase margin. Simulation and experimental results for the PMSM controller verify the performance of both the current loop and the speed loop auto-tuning.     

卫星控制中心系统平台的高可用设计与实现

卫星控制中心是卫星地面测控管理系统的重要组成部分。随着信息技术的飞速发展和测控关键业务量的增长,高可用性、高可靠性及易维护日益成为卫星控制中心系统的设计目标。为满足卫星测控任务的需求,本文描述了卫星控制中心的网络系统、数据处理系统和数据库集群系统的高可用设计,并给出具体项目的成功实现。     

基于双光纤检测技术的激光点火控制系统设计

基于双光纤检测技术,对激光点火控制系统进行分析,给出了激光器输出功率和检测合格判据的设计方法,分析了影响激光器最低输出功率设计的各相关因素,为激光点火控制系统设计提供了理论依据.     

CHZ型重力仪重力测量伺服回路的分频段控制方案

针对原有CHZ型海洋重力仪重力测量伺服回路PI控制模型的不足,提出对强扰动频段(海浪频率)用一个独立反馈回路进行抑制衰减的方案,并进行了理论分析和建模仿真,表明该方案可将海浪对采样质量的扰动幅度降低50％以上,并提高重力测量带宽一个量级,因此可改善重力仪在恶劣海况下的工作性能,改善测量中的非线性效应.